The Suzuki VZ800, also known as the Intruder 800, typically requires a high-quality motorcycle oil with a viscosity of 10W-40 or 20W-50, depending on the climate and riding conditions. It's important to choose an oil that meets or exceeds the API (American Petroleum Institute) specifications for motorcycle engines. Synthetic or semi-synthetic oils are often recommended for better performance and protection. Always refer to the owner's manual for specific oil recommendations and change intervals.
what is the capacity or how much fork oil does a vz800 take ?
2.2quarts
2.5 qts with out a filter change and 3 qts with on my 2000
About 2.2 quarts with a filter change and a little less than 2 quarts without changing the filter.
Should be under the seat.
The Suzuki VZ800, also known as the Boulevard S50, typically requires about 130 mm (5.1 inches) of fork oil level when fully compressed, with a total capacity of approximately 530 ml (18 oz) for each fork leg. It's essential to check the owner's manual for specific details and any updates or variations that may apply to different model years. Always use the recommended type of fork oil for optimal performance.
Approximately 1400ml
Loose timing chain or belt.
There isn't one. There is a screen around the fuel petcock inside the tank, but it does not have to be removed as part of regular maintanance.
The fuses for the Suzuki VZ800, also known as the Intruder 800, are typically located under the seat. To access them, you'll need to remove the seat by unscrewing the bolts that secure it. Once the seat is off, you should see a fuse box that contains the fuses for various electrical components of the motorcycle. Always consult your owner's manual for specific details and fuse ratings.
On a Marauder VZ800 (1998), remove the black cap (triangle shap) on the right side at the front. There you can fill radiator fluid.
The gap for all valves is .003 to .005 inches (.08 to .13 mm). ( from 97-2002 Suzuki Marauder VZ800 service manual).