The drain plug on the transmission of a Honda GL1500 typically requires a 17mm wrench. However, it's always a good idea to double-check the owner's manual or inspect the plug directly to confirm the size, as variations can occur. Make sure to have a proper wrench on hand to avoid rounding the plug.
The transmission drain plug on a 1999 Honda CR-V is found on transmission. It is located under the housing and requires a 17 mm wrench to remove.
Drain plug is located on Bottom right side of transmission, it has a square hole in it for your 3/8 ratchet wrench .
94 civic transmission fluid drain
Left / front (driver's side) of transmission has a large plug nut. it uses a 3/8 socket wrench (insert socket handle into hole in drain plug - left loosy)
Undo the fill plug with whatever sized socket/wrench needed then undo the drain plug with a 3/8" ratchet and drain the old fluid into a container. Retighten the drain plug and refill the transmission with Honda Manual Transmission Fluid or 10w30 motor oil. You will need a way to squirt the oil through the fill hole. Retighten the fill hole and you are set.
17 mm socket or boxed in wrench.
On a 2007 Honda Fit, the automatic transmission (AT) drain plug is located on the bottom of the transmission case. You will need to raise the vehicle safely to access it. The drain plug is typically a hex or bolt type and should be removed using the appropriate socket or wrench. Always ensure to use a suitable container to catch the fluid when draining.
There is no drain plug.
17mm 17mm
19mm
On the end of the transmission.
There is a fill plug and a drain plug located on the transmission the upper bolt is where you would fill it at. need a socket or wrench. you fill it till it runs out level of the bolt hole.