For a 2004 Suzuki Volusia, the recommended fork oil is typically a 10W fork oil. It's important to use a high-quality oil to ensure proper performance and handling. Additionally, the oil quantity per fork leg is usually around 5.5 to 6.0 ounces, but it's best to consult the service manual for specific details and any variations based on modifications or specific riding conditions.
Sae 5w
Honda Spec Manual says fork oil capacity for 94 VT600 is 449cc's in each leg.
330ml per fork
for model 1996-2004 the oil capacity per fork is 477cc, or 82mm from the top of the fork tube when fully compressed (no spring inside)
The Suzuki Volusia VL800 (Also the Boulevard C50) requires 3.0 L or 3.2 quarts if the filter is not replaced. If you replace the filter, it requires 3.4 L or 3.9 quarts. Check The Volusia Owners League for tons of great info about this bike http://volusiaowners.com
The fork oil capacity for a 2004 Kawasaki ZX-9R is approximately 485 ml (16.4 oz) per fork leg. It's important to use the correct type and viscosity of fork oil, typically 10W, to ensure optimal performance. Always refer to the owner's manual for specific details and recommendations.
For a 2004 Yamaha FJR1300, the recommended fork oil capacity is approximately 600cc (20.3 ounces) per fork. It's important to use the correct type and viscosity of fork oil, typically 10W or 15W, depending on your riding style and preferences. Always check the owner's manual or service manual for specific details and ensure the forks are fully compressed when measuring the oil level.
150 in lbs
For a 2004 Kawasaki KX125, the recommended fork oil capacity is approximately 400cc (or 13.5 ounces) per fork leg. However, it's important to check the service manual for your specific model, as variations can occur. Additionally, ensure to set the correct oil level after filling, which is typically around 100mm from the top of the fork tube when fully compressed. Always use the recommended fork oil type for optimal performance.
120mm under the top of the fork
The 2004 Honda CR250 typically holds approximately 350 cc (or about 12 ounces) of fork oil per leg. It's essential to check the specific service manual for exact specifications, as it may vary slightly based on the fork model or any modifications. Always ensure you use the recommended type and viscosity of fork oil for optimal performance.
Haynes Manual states that for focus builds between 2001 and 2004 the recommended torque spec for the oil drain plug is 37 Nm / 27 lbf ft.