Socket 24 and for the oil filter socket 27. Jack and jack stands prove to be very helpful.
Make sure u use the right viscosity oil grade.
0.9MM with spark plug gap tool.
To dismount the dashboard in Peugeot 107 you need the tool box. The tool box will help you in opening the bolts and nuts and dismount the dashboard.
you need a new spark plug. they are about 5 dollars and you will need a special tool to open up the area and get the old spark plug out. Your Honda dealer will help you with that.
apparently a 21mm socket set. or in the middle some square tool. im just gonna try different size sockets and see if 21mm works
Yes, to undo the drain plug on a Peugeot 206 1.1, you typically need a special socket or tool. The drain plug often requires a specific size, usually a 21mm or 24mm socket, depending on the model year. It's best to check your vehicle's manual for the exact specifications. Additionally, a socket with a long reach may be helpful due to the tight space around the oil pan.
All you need is a socket that will fit inside of the freeze plug and a hammer to drive it back in the block. You don't need a special tool.
On a 1994 Peugeot 106, the diagnostic plug is located under the dashboard, near the driver's side. Specifically, it can usually be found above the pedals, to the left of the steering column. This is where you would connect a diagnostic tool to read fault codes or perform diagnostics on the vehicle.
nope
Use 3/4 " LNKey.
Usually either a Square nut or a 3/8" hole use and extension without a socket
8mm Square plug
Refer to the manual to see the tool that you will use to release the tensioner on your Peugeot 206 1.9 HDI.