Use a 10mm Socket to remove the bolts And then use a c Clamp to depress the piston but make sure that the brake fluid cap is off first, While pushing the piston in turn slowly or else you will mess up the Master Cylinder because i have the same car and i just had that problem.
A twelve point 1/4 inch socket.
what can the socket use to take the bolt for breks pad
14 mm wrench or socket--top bolt does not loosen--take out bottom bolt and snap out pads -- front and back of each wheel
It is called an oxygen sensor socket.
You need a 3/8 Allen key to release the caliper.
youll need a 5/8 superdeep plug socket
socket rench and a c-clamp
ratchet or socket
You need a 3/8" allan key or hex socket - not a torx
Nut you see after you remove the dust cover, in the middle of the drum, 30mm socket needed to remove
13/16 inch
There are not any special tools needed to remove the brakes on your 2003 Ford Expedition. You will need a lug wrench, a 9/16 socket, a screwdriver, and a needle nose pliers.