4l60e
no because the lt1 has a different transmission bellhousing
Yes It will
The LS1 and LT1 designations are for the engine not the transmission. A 1993 Camaro Z28 would have originally been fitted with an LT1 engine. Available transmissions behind the LT1 would have been the Borg Warner T-56 (manual), or the 4L60E (automatic).
Yes a lt1 will fit in a 1991, but i believe the motor mounts are a little different for the lt1. You cannot transplant it though without an PCM from an lt1, which needs a 4l60E transmission to control the transmission and engine codes. There are standalone kits available but they cost more than a PCM.
Passenger's side of the transmission.
More torque from the LT1,so I would think you will need to change the transmission and rear end.
it weights about 750 lbs without the transmission
No, they are different. They do use the same console shifter though. I know that's not what you wanted to hear. Sorry.
yes it will fit any Chevrolet transmission will bolt up to any Chevrolet engine except for lt1 and ls motors
Yes, a 700R4 transmission can be bolted to an LT1 engine in a 1995 Caprice Classic, as both components are part of the GM family and share similar mounting patterns. However, you'll need to ensure that you have the correct adapter and possibly modify the driveshaft, as well as address any differences in the transmission control systems. Additionally, be aware that the LT1 typically uses an electronic transmission, so you may need to consider compatibility with the vehicle's wiring and computer systems.
Using an adapter plate eliminates all restrictions. You can use any transmission you can get an adapter for.
either a 4l60e which is a 4 speed automatic, or a t56 6 speed which is a manual