0
What else can I help you with?
What kind of tranny fluid does a manual transmission in a Honda prelude take?
manual tranny doesnt have fluid u noob manual tranny doesnt have fluid u noob
Where do you check transmission level on a manual 5 speed ford explorer sport trac truck?
A manual tranny does not take tranny fluid. So you can't check it. A manual tranny does not take tranny fluid. So you can't check it.
What type of transmission fluid does a 2004 Nissan Maxima use?
NISSAN MATIC-K AUTO TRANNY FLUID, (i work for a tranny shop)
How many quarts of tranny fluid does it take for a tranny service on a 1996 Plymouth Voyager?
About five.
When filling the transmition on a 99 if it is a stick shift does it have to be in gear when you fill up the tranny you did not have it in gear and when you poured in the tranny fluid it was pouring ou?
manual tranny's take gear oil not tranny fluid. you need to get all that fluid out and fill the tranny with 80/90 weight gear oil
How do you drain and fill the clutch fluid on a 98 Saturn SC2?
There is a bolt under neath the tranny. take it out and drain the fluid. ATF fluid 2.6 quarts is the capacity of the tranny
What type of fluid goes in a 94' GMC Suburban 4x4 trans case?
Dextron tranny fluid
How do you drain tranny fluid 700r4?
Take the bottom pain off
Does a 1967 Ford Mustang take regular power steering fluid?
You can use some modern type fluids. However, the system was designed to use Type F automatic transmission fluid in both the tranny and PS.
89 Honda CRX si - what type of tranny fluid for a centerforce clutch?
don't try to put trans fluid on clutch. manual tranny uses 40wt oil.
What type and how much trans fluid does a 33 cc Kragen Zooma gas scooter hold?
it doent take transmission fluid unless your tranny has gears if it is just equipped with a cedntrifugal clutch no transmission fluid is needed.
Procedure to remove trans from 87 transam?
Take out the driveshaft, pull shifter cables off the tranny and unbolt the tranny from the engine , take tranny fluid lines off the tranny and have floor jack under the tranny, take the inspection plate off and take the bolts out of the torque converter that holds it to the flywheel and it's out.
