0
What else can I help you with?
Why would check engine light still be on after replacing 02 sensor on 2000 grand prix gtp?
There is another cause for the code.
If the timing belt breaks on a 2003 Chrysler PT Cruiser do you need to replace the engine?
The valves can bend. You would then be repairing or replacing the engine.
What is top end maintenance of engine block?
Top end maintenance would be maintenance done to the head, or top of the engine. Typically this included grinding the valves, replacing valve seals, milling the head flat, and replacing the gaskets.
Would replacing the battery trigger the check engine light to come on a 99 Sienna?
My check engine light came on because the terminals were not connected tightly. no. quite the contrary. if you have a "check engine" light on, disconnecting, or in this case replacing the battery will turn it off. you have a different problem.
You'v replaced your thermostat and radiator on your 1983 cutlass and its still overheating what is causing it to still overheat could it be the water pump?
i would have replaced water pump long before replacing radiator. also check engine oil to see if it has engine coolant mixed in.if it has then the problem is more likely to be a bad head gasket
Why would your check engine light come on after replacing the water pump on my 96' Chevy Lumina?
Replacing the water pump will not cause the check engine light to come on. Either it is a coincidence or you have accidentally disconnected a wire or damaged a sensor somehow.
Why after replacing raditator for overheating water pump and new spark plugs would the 04 jeep Grand Cherokee still be missing in the engine and carrying on jumpy like?
possible cracked head and a worn camshaft lobe
What will stop a 2001 s10 pick up from starting?
If the starter is engaging and is cranking the engine over but the engine refuses to run, my first guess would be the fuel pump is bad.
What could be wrong with an 88 Chevy 350 after replacing the engine that it would have spark and you know it's getting gas because you can smell it but it wont fire?
engine timing
Why doesn't transmission work after replacing engine?
I would imagine that the tranny was not inserted correctly. In order to do this, you must use the poker.
Why would an engine rev upand kill itself afterwards?
if it has a carburetor try cleaning it and try replacing the throttlepositioning sensor.
Would a worn out lifter cause a taping in the engine or do you need to shim a valve spring?
It is cheaper than replacing the lifter
