A 2000 Avalon’s gas and speed odometer, along with the time, date, and gas mileage display not functioning, could be caused by a blown fuse, faulty wiring, or a malfunctioning instrument cluster. Additionally, issues with the vehicle's speed sensor or a failing body control module might also lead to these symptoms. Inspecting the fuses and connections, as well as using a diagnostic scanner, can help pinpoint the problem. If necessary, professional diagnosis may be required for more complex issues.
You can not fix the odometer on the early Saturns. You must replace the whole instrument panel.
To replace the odometer lamp on a 2001 Toyota Avalon, first, disconnect the negative battery terminal to ensure safety. Then, carefully remove the dashboard panel and unscrew the instrument cluster to access the back of the odometer. Locate the bulb socket for the odometer light, twist it counterclockwise to remove, and replace the old bulb with a new one. Finally, reassemble the cluster and dashboard, reconnect the battery, and test the odometer light.
AnswerThe 98 Pontiac stores the odometer in the instrument panel cluster. The odometer can be reprogramed either by the dealer or there are companies that will re-program it for you (seach google, there are lots). Or you can buy the odometer programmer for about $1000 but its cheaper to just send the cluster module in. (not only is it legal to reset the odometer; its required in most states when you replace the engine. The odometer is required to reflect the mileage of the engine *NOT* the vehicle)
have you checked your fuses?
Many won't roll back, but you can often put a drill on the speedo and roll it forward to the proper mileage.
To find the total miles on a 2007 Polaris Sportsman 500, check the odometer display on the instrument panel, which typically shows the total mileage. If the odometer is digital, it will clearly display the miles traveled. If it's malfunctioning or if you suspect the mileage may have been altered, you can also check maintenance records or service history for any documented mileage.
In a 2000 Honda Civic DX, the odometer reset button is typically located on the instrument panel, near the speedometer. It is a small, recessed button that may require a pointed object, like a pen or a small screwdriver, to press. You usually need to hold the button down while the odometer is displaying the trip mileage to reset it.
No it will not, the mileage information is stored in the cluster so you have to have it repaired. Do not lose the original or else you will pay much more. Repair costs range at about $150
What year is it? If it's a 97-04 Regal, the problem lies withing the instrument panel board and must be refurbished. DO NOT try to replace the odometer or get a whole new one. You will lose mileage information. I repair instrument panels and I'm willing to help you, contact me at ANCTechnologies at Hotmail.com
It is against the law for you to change the odometer reading. Ask the State Police (Highway Patrol) in your area what the procedure is. Be careful, there's something like a $10,000 fine for changing one. ----It is only illegal if the car is less than 10 years old and only if it is done with the intent of misleading someone to the actual mileage of the car. If you are changing the mileage on a replacement instrument panel to accurately show the actual mileage, it is perfectly legal. As to how to do it? There are some videos on you tube that show how.
Don't understand the question. The TRIP METER is supposed to re-set to zero so that it can begin anew with the mileage for each new trip. It is the ODOMETER (total mileage) that is not supposed to re-set. To switch back and forth from the trip meter to the odometer press down for a moment on the plastic stem that protruedes through the plastic lens of the instrument panel.
To reset the trip mileage on a 2010 Ford E-250 van, locate the trip odometer button on the instrument panel. Press and hold the button until the trip mileage display resets to zero. This is usually a simple push-button mechanism, so ensure you hold it for a moment to confirm the reset.