0
What would cause the bathtub faucet to leak when both knobs are turned off tightly?
On the bottom of the "stem" is a rubber gasket called a washer. This washer is solely responsible for the stoppage of flow. Some "stems" do not use washers but are valves within themselves. You will have to replace the "stem". To fix this: 1) Turn water off under sink by turning the T-Stop valves (for a sink) or the Water Main in the house (for a tub/shower). 2) Remove faucet handle ( 1 screw usually under a metal or plastic cap on the top of the handle). Be careful for the screws are often rusted or degraded and can cause alot of problems. 3) Remove the stem using the proper sized wrench. Often times the stem is reverse threaded meaning "righty loosey" rather than "lefty loosey" (careful! here too you can run into degradation). 4) On the bottom of the stem you will see the washer (held in with 1 screw {degredation warning}) Remove the washer (if you see no washer it is time to buy stems) and match it in size at your local Hardware store or with the proper one in the Assortment Pack you previously purchased (Hint! Hint!). If the screw on the bottom of the stem is completely (most likely) degraded (un-removable) you will have to replace the stem ($6.00 - $21.00). Your local Hardware store or Plumbing supply house will serve you if you bring the old one with you. (there are many,many,many different types) 5) Reverse the process for assembly and your will no longer be leaky. Y-THINK-Y
What else can I help you with?
Why is my bathtub faucet leaking from the handle?
Your bathtub faucet may be leaking from the handle due to a worn-out or damaged washer or O-ring inside the faucet handle. This can cause water to seep out when the faucet is turned on. It is recommended to replace the washer or O-ring to fix the leak.
What would cause low water pressure in a bathtub faucet?
The faucet is clogged
Why does my outdoor faucet leak when turned on?
Your outdoor faucet may be leaking when turned on due to a worn-out washer or seal inside the faucet. This can cause water to escape through the gaps, leading to a leak.
Why is my outside faucet leaking when a hose is attached?
The outside faucet may be leaking when a hose is attached due to a worn-out washer or a damaged seal in the faucet. This can cause water to escape and leak out when the hose is connected and the faucet is turned on. It is recommended to replace the washer or seal to fix the leak.
Why does my kitchen faucet leak when turned on?
Your kitchen faucet may leak when turned on due to worn out or damaged parts, such as the O-ring or washer, which can cause water to seep through. It could also be due to a loose or faulty connection within the faucet itself. Regular maintenance and timely repairs can help prevent leaks in the future.
How do you stop a faucet from sputtering?
Often a faucet will sputter if there is air in the lines. This happens if the water has been turned off and then on again. If this is the cause, it is only necessary to run the water a while and the air will get out of the lines, and the sputtering will stop.
What would cause a black silt to come from the bathtub and shower faucet for about fifteen seconds?
You should purge all your water pipes of built in sediment. Don't forget, you are drinking the water too!
Why is my shower dripping when turned off?
Your shower may be dripping when turned off due to a worn-out or faulty shower valve or faucet. This can cause water to continue leaking even when the handle is in the off position. It is important to have the valve or faucet repaired or replaced to prevent water waste and potential damage.
What could cause a leaky faucet?
A loose bolt or screw is the most common cause for a leaky faucet
How do you clean a saxophone in the bathtub?
you don't clean it in the bathtub, that will cause it to rust
Why is my shower head dripping when it is turned off?
Your shower head may be dripping when turned off due to a worn-out washer or seal inside the faucet handle. This can cause water to continue flowing even when the handle is in the off position.
What would cause an extremely loud vibration in your house when running hot water in a sink if you just replaced the old worn-out seals with new ones you had to make yourself?
If water gets under a faucet washer it can cause a loud vibration when the water is turned on. You either need to find a proper replacment or get a new faucet.
