0
I am assuming by rotor bearing you mean a wheel bearing, to see if a wheel bearing is bad there are two was to do this, first is to move the wheel in a up and down motion (with your hands) and see if there is any play, the other way (if it is the front wheel bearings this will only worth with an awd or fwd vehicle) you can lift the car and put it in drive and listen for any noise coming from the bearing itself, you may need a pair of electronic ears or a stethoscope to do this, if there is a grinding or rumbling noise at all, you have yourself a bad wheel bearing
What else can I help you with?
What would you asses for when checking rotor bearing?
Mooning.
Why use journal bearing in turbine?
putting a journal bearing at each end of the turbine rotor or shaft would be to support it.
Why would a car go shaking?
Wheel imbalance, bad wheel bearing, bad rotor(s).
How would you assess wheel bearings?
Most front wheel drive wheel bearing/hub assemblies are not serviceable.
1988 rx7 was running then just shut off and now won't restart it's getting fuel but not firing?
I would start checking spark plugs and wires, if they are good I would then check the distributor cap and rotor bug. I would start checking spark plugs and wires, if they are good I would then check the distributor cap and rotor bug.
How do I assess the reliability of a paint contractor?
I would reccomend checking the painter out through the Better Business Bureau. They are very reliable.You will be able to see if the paint contractor you are checking out is dependable.
Why would rotors go bad twice in one year?
How are your calipers an wheel bearings looking. i had a bad wheel bearing and actually blew and warped my rotor.
What would cause a popping sound at low speeds that stops when you touch the break after replacing a cracked front right rotor?
Check the bearing and wheel lugs.
How would one assess and examine the effectiveness of common indigestion remedies?
A patient can assess the effectiveness of remedy by checking whether he or she gets cure of his or her ailment. Scientists can assess the effectiveness of remedy by conducting randomised placebo controlled double blind studies
How do you know if the bearing is bad or the rotors are loose?
If you have a bad rotor, when you turn a corner sharply it will make a humming noise kind of a wah wah wah (if you will). If you have it apart, the bearing would probably look visibly worn, rusty, dry, ground down etc. Hope this helped.
Why does your Chevy 4.3L V6 Cheyenne idle rough you have replaced plugs plug wires distributor cap and rotor?
I would recommend checking for codes before you do anything else.
How do you get to the Wheel Bearings on a 1995 Mystique?
You would need to jack up the tire and remove it and take off the cap and remove the carter pin and reove the rotor and inside the rotor you will find the bearing. There will be two of them the inner bearing as well as the outer bearing. It's always good to change them both if you have the money to do so. No it only has one wheelberring it is a pressin berring easyist way is to take the ball berrings out so you have just the race heat it up put i mini sledge aganst it and hit the mini sledge with another hammer
