To put brakes pads on a 1994 Honda Civic, you will need Bleed brake fluid.
Remove as much fluid from the Civic brake fluid reservoir as possible, using a syringe, turkey baster, etc.. Open the wheel bleeder valves and let the lines drain. Refill the system with new fluid and bleed the lines to finish the fluid change.
DOT 3 brake fluid
Brake Fluid Dot 3 Note: Brake and Clutch fluid are the same
DOT3
A 1997 Honda Civic uses DOT3 type brake fluid. This is the standard for power brakes in most cars for the last 20 years.
Check your brake fluid level!
every 30,000 miles, in order to prevent internal decay on the rubber lines.
DOT 3 OR 4
Yes, it should be changed as outlined in your owners manual. If you have no manual change them both every 75,000 miles.
I recommend you use only genuine Honda Brake Fluid DOT3 but you can use another brand as long as it is DOT3.
Brake fluid type is Dot 3. It should also say on the reservoir cap.