I dont as such drive,but can ride a motorbike manuall, but you use the numbers 1 to 4 as you progress in speed,upon average your first gear is to start of(10-15 miles an hr) as you gain speed you change up a gear,as you slow down you change down gears.
To properly use the gear shift on a bike, you should first understand how the gears work. Lower gears are for easier pedaling on inclines or starting from a stop, while higher gears are for faster speeds on flat terrain. To shift gears, use the gear shift levers on the handlebars to move the chain onto a different gear. Shift to a lower gear when going uphill or starting, and shift to a higher gear when riding on flat ground or going downhill. Make sure to pedal lightly while shifting to avoid damaging the gears.
To remove the gear shift knob on the SLK 320, first pry the cover from the gear shift knob. Then, use a screwdriver to remove the screw in the center of the knob. This will then allow the knob to be removed.
To shift gears on a bike, you use the gear shifters located on the handlebars. You can shift to a higher gear by pushing the shifter away from you, and to a lower gear by pulling it towards you. This changes the tension on the chain, making it easier or harder to pedal.
What are the two d's on the gear shift for>
Assuming you're referring to the transfer case gear shift, it should be in "high" for normal use
truck start shift is hard to move in gear
To properly shift gears on a bike, use the gear shifters to move the chain onto a different gear. Shift to a lower gear when going uphill or starting from a stop, and shift to a higher gear when going downhill or riding at a fast pace on flat ground. Make sure to pedal lightly while shifting to avoid damaging the gears.
It's use is automatic. You get a boost with every gear shift.
use the clutch
No thanks, I do not want to shift to 3rd gear or drive.
700r4 gear shift lever want lock in place
The shift cable has failed.