full details below, special tool required. Replacement Interval Guide Renault recommend: 03/99: Replacement every 60,000 miles or 5 years. 04/99 : Replacement every 72,000 miles or 5 years. The previous use and service history of the vehicle must always be taken into account. Check For Engine Damage Check For Engine Damage CAUTION: This engine has been identified as an INTERFERENCE engine in which the possibility of valve-topiston damage in the event of a timing belt failure is MOST LIKELY to occur. A compression check of all cylinders should be performed before removing the cylinder head(s). Repair Times - hrs Repair Times - hrs Megane 1,6i 16V 1999-02 Remove and install 3,60 Special Tools Special Tools Manufacturer:Renault Model: Megane (XAO) (99-02) 1,6 Engine code:K4M 700 Output: 79 (110) 5750 Tuned for: R-Cat Year: 1999-02 © Autodata Limited 20042008/05/22 V5.373- Crankshaft timing pin - Renault No.Mot.1489. Camshaft setting bar - Renault No.Mot.1496. Special Precautions Special Precautions Disconnect battery earth lead. DO NOT turn crankshaft or camshaft when timing belt removed. Remove spark plugs to ease turning engine. Turn engine in normal direction of rotation (unless otherwise stated). DO NOT turn engine via camshaft or other sprockets. Observe all tightening torques.
timing belt
The 3.0L V6 has a timing belt that must be replaced every 90,000 miles.
from 300 to 500 depending on engine and the area you are
timimg belt must be changed every 50,000 km
To replace the timing belt on a Renault Scenic, you'll typically need specific tools such as a timing belt kit, which includes the belt itself, tensioner, and idler pulleys. Additionally, a set of sockets, wrenches, and possibly a harmonic balancer puller may be required. A timing tool kit designed for Renault models can also be beneficial for aligning the camshaft and crankshaft. Always refer to the vehicle's service manual for detailed instructions and specifications.
The timing belt on a 2001 Renault Scenic should typically be replaced every 60,000 to 72,000 miles, or approximately every 5 to 7 years, whichever comes first. It's essential to consult the owner's manual for specific recommendations, as maintenance schedules can vary based on the engine type and driving conditions. Regular inspections are also crucial to ensure the belt is in good condition and to prevent potential engine damage.
I paid £360, although I got a few quotes around £500.
To replace the timing belt on a Renault Megane Scenic, first disconnect the battery and remove any necessary components obstructing access, such as the engine covers and accessory belts. Align the timing marks on the crankshaft and camshaft to ensure proper timing, then remove the old timing belt while taking care to note the routing. Install the new timing belt, ensuring it is taut and properly aligned with the timing marks, and then reassemble all components in reverse order. Finally, check the tension of the belt and reconnect the battery before starting the engine to verify the installation.
2 possibles: 1:The engine was not timed correctly when the timing belt was replaced 2: An ignition lead left disconnected when the timing belt cover was replaced.
The fan belt cannot be tightened. The scenic has a tention pulley that automatically adjusts the belt. If the belt is slack, it is either the wrong size or it is stretched and needs to be replaced immediately as serious damage can occur in the event that the belt should slip off.
On a Renault Scenic 1.5 dCi, the timing belt should typically be changed every 70,000 to 100,000 miles, depending on the specific model year and driving conditions. It's crucial to consult the owner's manual or a professional mechanic for the exact interval for your vehicle, as it may vary. Regular maintenance is essential to prevent engine damage associated with timing belt failure.
how to change Renault megane timing belt