0
What else can I help you with?
Why would your brake lights stay on at all times?
Your brake light switch is out of adjustment. Don't know what vehicle you have but most brake light switches are located on the brake peddle lever just above the brake peddle pad.
Where is brake light switch on 1991 corvette?
just above the brake peddle
Where is brake light switch on 2004 jeep liberty?
just behind the leg on the brake peddle
Your 94 Chevy truck blows the brake fuse when you press on the brake peddle?
There is a short in the wiring or a corroded brake light receptacle.
Brake light won't work on 93 Volvo 940 wagon?
check the switch at the top of the brake peddle.
My brake lights don't work on 96 Chevy Tahoe the bulbs are good and no fuses are blown Any ideas?
You may need to check your brake light switch. It is a small switch located on top of your brake peddle (up on the arm of the peddle). This switch allows the brake lights to come on whenever you push the peddle.
How do you trouble shoot a brake light problem in a 1994 GMC jimmy All lights will work but brake lights?
AnswerCHECK BRAKE LIGHT SWITCH UNDER DASH LOCATED JUST ABOVE BRAKE PEDAL.there is another switch next to arm on the brake peddle that slides up and down when you work the peddle . mine was loose
Why don't bake lights come on when pressing the brake peddle?
Possibly blown fuse or defective brake light switch.
What would cause the brake light to be on in a 1998 Chrysler Cirrus?
On your brake peddle there is a switch it is either bad or stuck, most likely.
Where is your brake light switch on a 1996 Geo Prism?
The break light switch is located on the backside of the break peddle arm.
Where is the brake light on-off BOO switch located on a 2002 Ford Expedition equipped with 4 wheel anti-lock brakes?
right above the brake peddle just follow the peddle up until you get to a switch this is the boo switch
If fuses and bulbs good tail lights work but not brake lights a 2000 Astra what could be wrong?
Check the brake light switch it's self, it should be on the brake peddle arm or bracket. The switch should show open when the peddle is neutral and should show closed when the peddle is pressed. If the switch shows nothing either way then it's hooped.
