0
What else can I help you with?
Why won't my engine crankshaft turn all the way by hand?
Try taking out the spark plugs first, because turning the crank shaft with the plugs in creates pressure. Or it could be that there is a bent rod and the piston head is in the head wall.
What might cause 1992 Ford Tempo crank shaft pulley not to turn when engine is on but accessories turn by hand when engine is off?
If you mean ... why the crank won't turn when the key is on and the acc.'s will turn, Well sounds like crank shaft is locked up. When the crank bearings try to pile up on each other and jam the crankshaft in it's final resting place, till rebuild.
What type of simple machine is a window hand crank?
A window hand crank is a type of simple machine called a wheel and axle. Turning the crank rotates the wheel, which in turn moves gears to open or close the window.
Can you make the input shaft turn by turning the output shaft?
yes
Will the engine turn over by the crank shaft bolt if it is seized?
No
Will car turn over is crank shaft sensor is bad?
Ye, it will turn over.
Can you turn the input shaft by hand when the transmission is out of the car?
Yes, you can turn the input shaft by hand when the transmission is out of the car, assuming there are no internal obstructions or damage. However, it may require some effort, depending on the transmission type and its condition. It's important to ensure that the transmission is in neutral to facilitate easier turning of the shaft.
How does a motor make car move?
with the combustion of the gasoline in the cylinders, the pistons are forced up and down, turning the crank shaft which then activates the transmission which sends energy to the drive shaft which in turn spins the wheels.
Can you turn a input shaft by turning an output shaft?
Manual transmission that is in gear-YES
Is the crank shaft pulley supposed to turn freely?
No, it's bolted to the end of the crank which pistons/rods attached to.
I have a Buick la Sabre that wont turn over?
Crank shaft sensor need replaced or cam shaft sensor
Do you have to turn the car on before trying to turn the crank pulley by hand?
Only if you want to lose your hand.
