Ask this question again specifying what the car is.
White smoke is antifreeze, intake or headgasket.
To smooth the output of the pulsating DC.
To smooth the output of the pulsating DC.
In a power supply diagram, the block that indicates a pulsating DC output is typically labeled as a "Rectifier" or "Rectifying Stage." This component converts the AC input voltage into pulsating DC by allowing current to flow only in one direction. The resultant output is not smooth and contains ripples, which distinguishes it from a pure DC output. Further filtering is usually required to smooth out these fluctuations.
unserrated
we generally use filters to smooth the sharp curves of DC component we get when we rectify AC components the pulsating Dc is not desirable to a no. of devices. These filters are used to make the pulsating DC to a stable one . To be more clear a pulsating DC is viewed as a sum of DC component and AC component these filters actually block the AC components and retain the DC component . so, mainly capacitors and inductors are used to obstruct or pass the dc components respectively
using a rectifier, which converts the AC signal into a pulsating DC signal, and then using a filter to smooth out the pulsations in the signal, resulting in a steady DC output.
Very good. it has DuPont which gives the inside of the engine silicon coating that smooth-ens the sleeves. so smooth run better performance and quieter engine.
Blood flow is pulsatile, meaning that it moves in a rhythmic pattern due to the pumping action of the heart. This pulsatile flow is necessary to deliver oxygen and nutrients efficiently to all parts of the body.
Most cars and trucks require gasoline or diesel fuel to operate, depending on the type of engine they have. Additionally, vehicles need coolant (usually a mixture of water and antifreeze) to regulate engine temperature and prevent overheating. Motor oil is also essential for lubricating engine components and ensuring smooth operation.
A transformer does not use a filter. You may be asking about the use of a filter in a power supply. A power supply uses a filter to change pulsating DC from the rectifier into smooth DC for the circuits that the power supply powers.
because you broke it!!