Under the coil pack.
Spark plugs are hidden under the plastic engine cover. You have to remove the ignition module as well which fits over the four spark plugs.
To remove spark plugs on a Clio 1.2 16v, first, ensure the engine is cool and disconnect the battery for safety. Then, remove the engine cover if necessary, and carefully disconnect the ignition coil connectors from the spark plugs. Use a spark plug socket and a ratchet to loosen and remove the spark plugs, turning them counterclockwise. After removal, inspect the old plugs before installing new ones, ensuring they are properly gapped before tightening them securely.
check spark plugs and coil pack
0.9 mm 0.03543 inch
Yes, NGK part number BKR5EZ spark plugs are suitable for the Renault Laguna 1.6 16V model from 2002. However, it's always best to verify compatibility with the vehicle's manual or consult a professional to ensure optimal performance and fit. Additionally, consider checking if there are any specific recommendations for spark plugs based on your engine's condition and maintenance history.
It is important to keep the spark plug gap in mind when changing the spark plugs of a car. The gap for this car is .051 to .055 inches.
Check the Vehicle Emissions Control Information ( VECI ) decal located in the front of your engine compartment ( it will show the type of spark plugs to use and the spark plug gap )
The spark plug gap for a Renault Scenic 16v 1.6 2007 model is typically set to 0.9mm or 0.035 inches. It is important to ensure the correct gap is maintained to allow for proper ignition and combustion within the engine cylinders. Using a gapping tool, carefully adjust the electrode distance to the specified gap measurement before installing the spark plugs.
what model is it? i.e mk2 2.0 172 or mk3 1.2 16v? mk3 1.2 16v
The Spark Plug Gap.032 (In thousandths of an inch)
To change the high-tension (HT) leads on a 1997 Peugeot 406 16V, first ensure the engine is off and cool. Disconnect the negative battery terminal, then carefully remove each HT lead from the spark plugs and ignition coil, taking note of their order. Replace the old leads with new ones, ensuring they are firmly connected to the spark plugs and ignition coil. Finally, reconnect the battery and start the engine to verify the installation.