The firing order for the 2004 Mustang 3.9L V6 engine is 1-4-2-5-3-6. The cylinder numbering is as follows: cylinder 1 is at the front on the driver's side, followed by cylinder 2, 3 on the passenger side, and then 4, 5, and 6 back on the driver's side. This layout ensures smooth engine operation and balanced power delivery. For a visual diagram, you would typically refer to the service manual or engine diagrams available online.
The # 1 cylinder is usually on the left (Drivers) side of the engine.
On top of the Master Cylinder, driver's side, near the firewall.
The usual place is on top of the master cylinder, which is on the firewall in front of the driver's seat.
The horn are located in the driver side front fender
the number 5 cylinder is the rear cylinder on the driver side 6 5 <---cylinder diagram 4 3 2 1 front of engine
they are located on the passengers side 1 being closest to the fan
Cylinder 1 is on the cylinder closet to the front of the car on the driver's side. The order is 1,3,5 on the drivers side and 2,4,6 on the passenger side from front to rear.
bank 2 is the drivers side of the engine in your Ford Mustang , and sensor 2 is after the exhaust has passed through the catalytic converter ( downstream )
The driver.
Second cylinder on the driver side.Second cylinder on the driver side.
On a 2000 Ford Mustang : The fuel pump inertia switch is in the trunk , behind the trunk liner on the drivers side , near the driver side rear taillight ( there is an access hole through the trunk liner )