ports
I need the fuel pump diagram of the fuel lines to connect
It is located on the fuel tank itself. Follow the fuel lines back, and where they connect to the fuel tank, that's probably where the pump is. Requires removal of the gas tank to replace.
It is unnecessary to bleed the lines after installing a new fuel pump. The fuel pump will pump all the air out of the fuel lines and start to work properly without any bleeding. Just install a new fuel pump and start the engine.
On a 1995 Tigershark watercraft, the fuel lines typically connect to the fuel pump and the carburetor. The fuel pump is usually located near the engine, and the fuel line runs from the tank to the pump and then to the carburetor. Ensure to check for any specific diagrams or service manuals for your model to confirm the exact routing and connections.
Follow the fuel lines from the fuel pump toward the engine. You will find the filter.Follow the fuel lines from the fuel pump toward the engine. You will find the filter.
1. Disconnect the fuel lines. 2. Remove the bolt on the front right face of the engine block which is opposite (just forward of)the front (forward) fuel pump mounting bolt. 3. Replace this bolt with one that is 2 in. or longer and snug it down. This will hold the fuel pump pushrod in place. 4. Remove the fuel pump mounting bolts and remove the fuel pump. 5. Replace the fuel pump, replace the longer bolt on the front of the block with the original and connect the fuel lines.
Follow the fuel lines from the front to the fuel tank. The fuel pump is connected to the tank. You'll have to remove the tank to remove the pump. Follow the fuel lines from the front to the fuel tank. The fuel pump is connected to the tank. You'll have to remove the tank to remove the pump.
check if the fuel pump ground is connected
You will need to remove the fuel pump wiring harness. Remove the fuel pump fuel lines. Remove the fuel pump retaining bolts. Reverse the process to install the new fuel pump.
Under the car, between the fuel pump and the injector pump.
Before
Begin by removing the fuel pump wiring harness. Remove the fuel pump lines. Remove the fuel pump retaining bolts. Reverse the process to install your new fuel pump.