In the Mercury Villager, the air filter is located in the engine compartment, specifically in the air intake assembly. To access it, you typically need to remove the air filter housing cover, which is usually secured by clips or screws. Once the cover is off, you can easily take out the old air filter and replace it with a new one. Always refer to the vehicle's manual for specific instructions related to your model year.
Mass air flow sensor is mounted after the air filter.
The intake air temp sensor and the mass airflow sensor both mount near the air filter.
According to fordparts.com : For a 1995 Mercury Villager : Engine oil filter ( Motorcraft FL - 839 ) Engine air filter ( Motorcraft FA - 1121 ) Engine fuel filter ( Motorcraft FG - 978 )
There is no cabin air filter on a 1995 Villager.
There is no such part on a Mercury Villager.
It is under the black plastic trim plate under the windshield wipers.
In the tube between the air filter box and the rubber intake boot.
The filter is located behind the RH side of the carbon canister under the hood.
The starter is mounted at the top of the transaxle at the back of the engine. You can see it clearly if you remove the air filter box.
In a 1997 Mercury Villager, the cabin air filter is located behind the glove compartment. To access it, you'll need to remove the glove box by unfastening the screws or clips that hold it in place. Once the glove box is removed, you can find the filter compartment, allowing you to replace the cabin air filter.
You would have to be more specific regarding which filter you are talking about.
Bottom front of engine.