on the break pedal itself if you look under th edash youll note a plug going onto it that's the switch / sensor
To change the brake light switch on a Ford Falcon ED, first disconnect the negative battery terminal to ensure safety. Locate the brake light switch, which is typically mounted on the brake pedal assembly. Remove the wiring harness connected to the switch, then unbolt or unclip the old switch from its mounting. Install the new switch by securing it in place, reconnecting the wiring harness, and finally reconnect the battery to test the brake lights.
It is in the fuse box which is bolted to the headlight switch. You need to remove the headlight switch ti access it.
brake light switch is above the brake pedal
Go to the parts desk of your local ford dealership and ask for a printout of the brake light switch.
The brake warning light
how to replace the brake light switch at the pedal of a 2001 ford zx2
the brake light switch is mounted above the brake pedal on the metal lever
The brake light switch is located under the dash. It is connected to the upper arm on the Brake pedal
The 1988 Ford brake light switch does not adjust, replace it with a new one.
The switch is located just above the brake pedal.
check brake light fuse and brake light switch on pedal
On the brake pedal arm.