Open the driver door and its on the side of the dash, where the hinges are. Just give the plastic cover a good pull and it will come off.
Clutch shares fluid reservoir with brake system, open drivers door and pull off small plastic panel at side of dashboard.
IN THE BRAKE MASTER CYLINDER RESERVOIR.
it uses the brake reservoir
The brake fluid is contained in a translucent reservoir with a black cap on the driver's side firewall. To add brake fluid, remove the cap and fill to the appropriate level on the dipstick indicator.
Master cylinder reservoir. Driver's side on firewall.Master cylinder reservoir. Driver's side on firewall.
http://www.ebay.co.uk/itm/KIA-PREGIO-WORKSHOP-REPAIR-MANUAL-2004-/300919205330
the correct torque for cylinder head bolt of kia pregio 2.7 diesel is 130-135ft-lbs.
The fronts do the most work so the proportional valve sees they get more pressure. That is also why reservoir for front usually larger as well.
The correct tire pressure of kia pregio is 50 psi.If the ambient temperature is higher,say going above 35deg,then keep it 45psi
A 2002 Kia Rio takes the brake fluid known as DOT3. It is the standard type of fluid used in cars with power brakes.
Under the little front bonnet.
Ineed my code ratio for my kia pregio 3.0 2000