open the hood.. look on the firewall... usually driverside.... there will be a metal tube with four metal hoses coming out of it with a plastic tub and a black cap. that plastic tub is the actual resivor. the metal hoses are brake lines and the tube bolted to the firewall is the master cylinder.
The 2002 Monte Carlo blinker flasher relay switch is located beneath the drivers side dashboard. The blinker flasher relay switch will be above the brake pedal.
Changing the brake light switch in your Chevrolet Monte Carlo is quite simple. The brake light switch simply plugs in and out.
On a 2003 Chevrolet Monte Carlo, the brake light switch is located above the brake pedal, mounted on the brake pedal assembly. To access it, you may need to remove the lower dashboard cover. The switch is typically a small, cylindrical component that activates the brake lights when the pedal is pressed.
.The 2000 Chevrolet Monte Carlo brake caliper bolt size is 9/16. The brake caliper bolt can be purchased at most auto-parts stores
dot 3
Brake light switch on the brake pedal is defective
It should be in the fusebox with the rest of the fuses.
on top of the brake pedal under the dash.
check your break fluid.
It's a black panel (without a cover) located by your left foot behind the parking brake pedal.
ratchet or socket
carefully