There are two fuse locations; One is a panel on the driver's side, in the end of the dashboard accessible only with the door open; The other is a black box under the hood, behind the battery. The brake light fuse is in the one under the hood. It should be a 20 Amp square fuse and the diagram in the cover identifies it as ST LIGHT (short for stop light, not brake light like some people might think, I know it took me a few minutes to figure it out). If you are looking at the box from the fender side, you should see two long rows of square fuses and the brake light fuse should be in the left row, fifth from the engine side.
You need to have the engine and abs checked for codes.
the tail light is screwed in from the inside of the bed of the truck
Where is Pcv on 4.7 2002 dodge dakota
If you want trailer brakes you need a brake controller.
Yes
Check the fuses and if they are good then check the brake light switch.
faulty brake light switch (on pedal)
If you DO NOT have the towing package you have 9" If you do you have the 11's
how do change brake pads on a 2002 dodge pickup 4x4
No the tail gate will not fit, they are different
Fuse or brake light switch are most likely.
No, Dodge does not have a 5.4l