The button for the valet glove compartment is typically located on the dashboard or near the center console, often marked with a valet symbol. To open the compartment, press the button, which will unlock it, allowing the door to swing open. If your vehicle has a manual lock, you may need to use the key or remote to unlock it first. Always refer to your vehicle's owner manual for specific instructions.
In a 2006 Hyundai Tiburon, the valet override button is typically located inside the glove compartment. To access it, open the glove compartment and look for a small button or switch that may be labeled for valet mode. This button allows you to disable the valet feature, giving you control over the vehicle's functions when valet parking. If you're unable to find it, refer to the owner's manual for specific instructions.
Press the button- then lock the glove compartment using your normal key, Now the trunk button down on left by the fuel door release button will not work - if you have the original "valet" key that came with the car, you can give it to a valet parking attendant and they cant get in the trunk or the glove compartment (of course you can't give them the key that you normally use which can open everything).
Check inside your glove compartment and make sure you have the trunk switch set to open with the button. This is a safety feature for valet parking.
A valet key will not open a trunk or glove compartment and is used when you let someone else operate the vehicle. Primarily used for parking attendants.
In the 1997 Jaguar XJ6, the valet switch is typically located in the glove compartment. This switch is used to disable certain features of the vehicle, such as the trunk release and the alarm system, when the car is being parked by a valet. To access it, simply open the glove compartment and look for a small toggle or button. Always refer to the owner's manual for precise information regarding its location and use.
In the 2005 Jaguar S-Type, the valet switch is typically located in the glove compartment. It is used to enable or disable the trunk release feature, allowing only valet personnel limited access to the vehicle's trunk. To access the switch, simply open the glove compartment and look for a small toggle or button. If you're having trouble locating it, refer to the owner's manual for specific guidance.
Make sure you're not using the valet key. It will not open the trunk, center console armrest, or the glove compartment. It will only have one side cut, with the other completely uncut.
When have your car parked by a valet you just hit that button and lock your glove box and they will not be able to open the trunk or gas filler door....Remember to take your door key with you. They can use the remote to get in the car.
There's a (fuel door) button on the dash (toward the center), next to the trunk open button. But both these buttons are disabled if the valet switch in the glove box is depressed. See to that valet switch (button) first.
Well, for mine which is the 6 cylinder, it is in the glove compartment below the button to open up the trunk. Well, for mine which is the 6 cylinder, it is in the glove compartment below the button to open up the trunk.
Check for a valet switch in glove compartment, not sure if it should be "on" or "off" , I believe it should be "off". But switch it to see if that works.
how to open a glove compartment on a 2008 highlander without the key