The carburetor on a Kohler CV23S engine is typically located on the side of the engine block, near the intake manifold. It is mounted directly to the engine and is connected to the air filter and fuel system. To access it, you may need to remove any surrounding components or covers. Always refer to the engine's service manual for detailed instructions and safety information.
12-050-01: Available at most Lowe's
The float is probably stuck open.
To remove the float bowl from a Kohler engine carburetor, first, ensure the engine is off and cool. Disconnect the fuel line and any governor linkage if applicable. Use a socket or screwdriver to remove the screws or bolts securing the float bowl to the carburetor. Carefully lift the float bowl off, taking care not to damage the gasket or any internal components.
Kohler for sure
The crankcase is full of gasoline. The reason for this is because of a problem with the needle in the carburetor. It allows gasoline to continue flowing into the combustion chamber even when the engine isn't running. An easy fix for this is to install a fuel shutoff valve in the fuel line close to the carburetor.
Hattiesburg, Miss. is the US factory for Kohler engines.
The float valve in the carburetor is not working properly. You will need to remove the carburetor and clean it or replace it.
Back fire can be caused by improper ignition or the wrong fuel air mixture. With the engine off remove the air cleaner and look below it. If there is fuel in the pipe then the carburetor is not stopping the flow of fuel and it needs a rebuild.
Yes it has a carburetor. An engine with fuel injection would be a fuel injected engine.
Because the engine is placed on the carburetor body and the engine is warm. The carburetor should be in the metal to be melted.
Yes, you can adjust the fuel mixture on a 26 horsepower Kohler engine. This is typically done by modifying the carburetor settings, specifically the idle and main mixture screws. It's important to follow the manufacturer's specifications and guidelines for adjustments to ensure optimal performance and prevent engine damage. Additionally, adjustments should be made carefully, as incorrect settings can lead to poor engine performance or excessive emissions.
That depends on what size of Kohler engine you have ( my 149 cc Kohler engine on my lawn mower takes ( 20 ounces / 600 ml )