In a Citroën C3, the coolant reservoir is typically located near the front of the engine bay, on the driver's side. It is a translucent plastic tank with a cap, often labeled with coolant symbols. To check the coolant level, ensure the engine is cool and look for the minimum and maximum markings on the side of the reservoir. Always consult your owner's manual for the exact location and specifications for your model year.
OAT Coolant.Mix the concentration dependant on your country (lowest temperature).seehttp://citroenc3owners.com/citroen-c3-tips/citroen-c3-coolant-t40.html
Red OAT antifreeze and coolant. Premixed will be easiest. See the link for more information: http://citroenc3owners.com/citroen-c3-tips/citroen-c3-coolant-t40.html
It is on the pipe behind the engine that goes to cabin radiator
There are many features of the Citroen C3 Picasso. Examples of some features of the Citroen C3 Picasso includes an anti-lock breaking system and remote central locking.
NO....
The diagnostic plug is in the glove compartment in C3
Yes, in the C3 Picasso at least.
NO
where is the gear box on a citreon c3 1.4 hdi
The diesel engine Citroen C3 have the fuel filter located in the engine bay, under the air intake pipe to the air filter. There are some pictures on this forum post: http://citroenc3owners.com/diesel-c3-tips/how-to-change-the-air-filter-on-a-citroen-c3-1-4-16v-hdi-t80.html and some instructions to remove the diesel filter here: http://citroenc3owners.com/diesel-citroen-c3/changing-the-diesel-fuel-filter-t102.html The petrol engine Citroen C3 has a filter in the fuel tank that lasts the life of the car.
To reset the service indicator Citroen C3, push the button on the instrument panel. Hold it for 10 seconds while turning on the ignition.
To change the thermostat on a Citroen C3, first, ensure the engine is cool and disconnect the battery. Drain the coolant from the radiator and remove the necessary components to access the thermostat housing, typically located near the engine block. Remove the old thermostat, clean the mating surfaces, and install the new thermostat with a new gasket. Reassemble everything, refill the coolant, and check for leaks before starting the engine.