with "ford radio removal tool"
Ford scanner tool.
as do a pair of tweezers, usually supplied with the car attached to the fuse box cover.
The Onboard Diagnostics Tool or ODBII for the 1999 Ford Windstar does require a fuse which is listed on the fuse chart of the Ford Windstar owners manual.
With a ball joint press and removal tool.
The ford focus has a fixed orrifix in the pipe from the evaporator to the condenser .it is replaceable with a special tool. It does not have a mechanical expansion has such.
In a 1999 Ford Expedition fuse # 3 is a 20 amp fuse for the cigarette lighter and OBD - II scan tool connector
Fuse box is located below the lower left side of the dash panel. Inside of the fuse box cover it has a diagram of what size and what the fuze is associated with the cars function. It also has a plce for spare fuzes and a removal tool as well.
There is a removal tool on the fuse panel, grab the fuse at the middle and just pull toward you. New one goes in by hand quite easily.
Fuse # 3 is a 20 amp fuse for the cigarette lighter and OBD II scan tool connector ( in the passenger compartment fuse panel ) of a 2001 Ford Expedition
The power seat fuse on a 1999 Chevy Tahoe is located in the main fuse panel near the hood release. A fuse removal tool is needed to removed and replace the fuse.
If you have a set of tweezers in your bathroom, those will do it. Typically, I use needlenose pliers.