The plastic, black box to the right of the engine is the air intake box. The Intake Air Temperature sensor is plugged in by a rubber grommet on the fender-side of the air box. It comes out with a simple pull.
In mass air flow sensor.
The intake air temperature sensor is located on the mass air flow sensor on the intake. There are five wires attached to the sensor.
The intake air temp sensor is coupled with the air flow sensor, just past the air filter, on top of the intake piping. It will have 2 screws holding it in. ~ P
The Intake Air Temperature (IAT) sensor in a 2003 Mazda Tribute is typically located in the intake manifold or the air intake duct, depending on the engine configuration. It is often mounted directly in the airflow path to accurately measure the temperature of the incoming air. To locate it, follow the air intake hose from the air filter to the engine; the sensor will usually be near the throttle body or intake manifold.
Coolant temperature sensor is locatedat the front of the intake manifold near the upper radiator hose.
should be along the tubing where the air filter is. It normally has 2 wires connected to it
The IAT sensor is built in to the mass air flow sensor. This is fitted on the air inlet just after the air filter and has five wires coming from it.
The map sensor is on the air intake line to the throttle body....
Trouble code P0113 means: Intake Air Temperature Sensor 1 Circuit High Input Replace the IAT sensor
It should be in the air intake. It look like a light bulb filement most of the time. Look on the air intake box. Also look in the tube coming from the cowl.
Intake Air Thermo Sensor - Dynamic Chamber
If it's not different than my 92' then it's inside the air flow meter. I belive it to be a little white plastic appendage inside the inlet.