somwhere outside the car duhhhhhhhhh
Correction...
The MAP or Manifold Air Pressure sensor, is going to be under the hood, on the end of the intake manifold farthest from the intake piping. It senses the overall air pressure in the intake manifold to assist the computer in setting the proper fuel/air ratio.
there is no MAP sensor on a Kia Rio from 2001 to 2005 they have Mass Air Flow Meters, and to change that you will have to remove the air box sitting next to the firewall as it it bolted to that box
in line with the air filter
To replace the map sensor on a 2004 Kia Sorento, first ensure the engine is off and disconnect the negative battery terminal. Locate the MAP sensor on the intake manifold, usually near the throttle body, and disconnect the electrical connector. Remove the mounting bolt(s) and carefully pull the sensor out. Install the new sensor by reversing the steps: insert it into place, secure it with the bolt, reconnect the electrical connector, and reattach the battery terminal.
on left side of engine compartment , in front of brake master cylinder
To change the MAP sensor on a 2004 Kia Sorento, first, disconnect the vehicle's battery to prevent any electrical issues. Locate the MAP sensor, which is typically found on or near the intake manifold; disconnect the electrical connector and remove any mounting screws. Take out the old sensor and replace it with the new one, ensuring it is securely fastened and the connector is reattached. Finally, reconnect the battery and start the engine to check for proper operation.
http://www.kiatechinfo.com creat an account and it will give you all the info you could need with great images and details
It uses a MAP sensor.It uses a MAP sensor.
The map sensor on a 2011 Kia Sportage is typically located on the intake manifold, near the throttle body. It is often mounted on the upper part of the manifold and can be identified by its electrical connector and vacuum line. If you're having trouble locating it, consulting the vehicle’s service manual can provide specific diagrams and instructions.
a map sensor is a manifold absolute pressure sensor.
if it has a 3.3 there is no map sensor
That year did not have a MAP sensor.
map sensor