In the Dodge Caravan, the odometer button is typically located on the instrument panel, near the speedometer. It may be a small button or a part of the trip computer controls. Depending on the model year, you might need to press and hold this button to reset the trip odometer or toggle between the odometer and trip settings. Refer to the owner's manual for specific instructions based on your model year.
The trip odometer button on a 2012 Dodge Grand Caravan SE model is located on the dash near the speedometer. It is held down for 5 seconds to reset the trip to zero.
To reset the trip odometer on a 2012 Dodge Caravan, locate the trip odometer button on the instrument cluster, usually labeled as "Trip" or "Reset." Press and hold this button until the trip odometer resets to zero. Release the button, and the reset should be complete. If the vehicle has a digital display, you may need to navigate through the menu using the buttons on the dash.
The button on the steering wheel marked "step" changes the odometer to trip 1 and trip 2. You can also reset these 2 different trips to zero as needed. When you press the trip button multiple times, you will also get the outdoor temperature.
A Dodge Caravan does not have an inertia or reset switch.
A Dodge Caravan does not have a reset switch.
No.
You can not reset the odometer. The trip meter can be reset by holding down the button.
you can't. the mileage signal is integral to the transmission shifting
No. A 1998 Dodge does not have a reset button or kill switch.
The cluster is the part that includes the speedo, odometer, fuel gauge, etc...
At times the odometer will stop working, then it will shift hard. 1994 Dodge Grand Caravan
With the key in the off position, hold down the trip odometer reset button until the dash lights start flashing. When it is all done start the car, and see if it reset.