On a Suzuki Intruder 1500, the oil drain plug is typically located on the underside of the engine, near the bottom of the oil pan. It is usually a hex or socket-type plug that you can identify by looking for a round, metal piece with a threaded opening. To drain the oil, you'll need to remove this plug using the appropriate tool. Always ensure the bike is on a level surface and allow the engine to cool before attempting an oil change.
On the Suzuki Intruder 1500, the oil fill cap is located on the right side of the engine, near the rear cylinder. It is typically marked with an oil symbol and can be accessed easily for topping off or checking the oil level. Make sure to use the appropriate oil type as specified in the owner's manual.
It is underneath the truck located on the front end of the oil pan.
4.5 quarts
oil filter is under the battery, oil drain plug has the number 4 on it toward the back of the engine. The clear lens on the right side of the motor is the oil level check. (MAKE SURE THE BIKE IS UP RIGHT WHEN YOU CHECK IT. NOT ON THE KICK STAND) and the oil fill is to the left of the clear lens oil check. just take the two hex screws out and remove the chrome cover.
On a 1991 Suzuki Intruder 750, the oil drain plug is located on the bottom of the engine's oil pan. It is typically a hexagonal-shaped bolt that can be accessed from beneath the motorcycle. Make sure to place a drain pan underneath to catch the old oil when you remove the plug. Always consult the owner's manual for specific details and torque specifications when re-installing the plug.
The Intruder uses 5.3 US Quarts for an over haul, 4.5 US Quarts with Filter Change, and 3.9 US Quarts for an oil drain with out changing the filter. That is the factory spec.
On the very back of the oil pan.
10W 40
remove the right side engine cover
It will be in the oil pan on the bottom
The motor oil drain plug is located on the motor oil pan. The Transmission oil drain plug is located on the Transmission oil pan.
Bottom of the oil pan.