answersLogoWhite

0

Parking lights may stay on after a BMW is turned off because the headlight is bad. A faulty relay could also cause this problem.

User Avatar

Wiki User

11y ago

What else can I help you with?

Related Questions

Where is the reversing light switch on a Peugeot 406?

the switch is located on top of the gearbox,under the airfilterbox


Where is the reversing light switch on a Peugeot 307?

It is a plunger type switch screwed into the top of the transmission casing.


Where is the reversing light switch peugeot 306?

Hi You shoudnt have one, just put it in reverse Nathan


Where is the fog light switch in a peugeot partner?

On the turnsignal/light switch lever, on the same turn ring switch as rear fog light. If not you got change it to one with it.


Your Peugeot 106 brake lights are not working.The Bulbs and fuse are ok and the brake light switch and the Back door brake LED work.?

the brake light fuse on a peugeot partner is F1O!! STOP SWITCH FUSE!!


Where is the reversing light switch on a Toyota avensis?

How do I get to the reversing light switch on a Toyota avensis 2005


Where is the contact switch for the reversing light on a peugeot 106?

The contact switch for the reversing light on a Peugeot 106 is typically located on the gearbox. It is usually mounted on the side of the transmission and is activated when the gearbox is in reverse. To access it, you may need to lift the vehicle and remove any protective covers if necessary. Always consult the vehicle's service manual for specific details and guidance.


Where is the reversing light switch on peugeot 107?

Its under the main gear box mount on my 2008 model which has to be removed to complete the exchange, its not a five minute job!


Does the 2003 Peugeot 206 have at least one reversing light?

Yes, it has one.


How do you change rear brake light switch peugeot 309?

To change the rear brake light switch on a Peugeot 309, start by disconnecting the battery to ensure safety. Locate the brake light switch, usually situated near the brake pedal. Remove the old switch by disconnecting the wiring harness and unscrewing it from its mount. Install the new switch by reversing the process, ensuring it’s securely in place, then reconnect the battery and test the brake lights.


Where is the fog light switch in a Peugeot 106?

The fog light switch on my peugeot 106 is next too the hazard warning switch and the rear window heater switch below the stereo.


How do you replace the reversing light switch on a Peugeot 306?

The reversing light circuit is controlled by a plunger type switch screwed into the top of the transmission casing. First check that the fuse has not blown. To test disconnect the wiring connector to the switch use a multimeter resistance should be high but when reverse is selected should be low if on buzzer mode the meter should buzz. If no buzz switch is broken if buzzing look for a wiring connection that is broken because the switch is ok.