answersLogoWhite

0

On a 2003 Jeep Liberty, the switch to operate the rear wiper is typically located on the dashboard near the steering wheel. It is usually a small knob or button that can be easily accessed by the driver. If you are having trouble locating it, consult the vehicle's owner's manual for a detailed diagram and instructions.

User Avatar

ProfBot

9mo ago

What else can I help you with?

Related Questions

Where is the switch to work the rear wiper 2003 jeep liberty?

In the 2003 Jeep Liberty, the rear wiper switch is located on the end of the windshield wiper control stalk on the right side of the steering column. To operate the rear wiper, turn the stalk to the rear wiper position. For intermittent use, you can pull the stalk towards you to activate the rear washer. Remember to ensure the rear wiper is in the "on" position for continuous operation.


Where is fuse for washer pump for 2003 Jeep liberty?

The owners manual list fuse number 22 as: Wiper Switch/Front & Rear Washer


How do you replace power steering pressure switch for Jeep Liberty 2003?

Remove the wiring harness from the 2003 Jeep Liberty pressure switch. Remove the power steering pressure switch retaining screws. Reverse the process to install the new power steering pressure switch.


What is the switch under the air conditioning controls on your 2003 Jeep Wrangler for?

rear wiper, rear defrost


Jeep liberty 2002 windshield wiper size?

The 2002 Jeep Liberty takes 19" replacement windshield wiper blades on both sides front.


Where is the turn signal flasher on a jeep liberty 2003?

It is part of the hazard push button switch.


What does lowash mean in Jeep liberty?

Wiper fluid


What is the rear wiper blade size on a 2003 jeep liberty?

I do not see aftermarket replacement rear wiper blades nor rear wiper refills listed in the aftermarket wiper catalogs for the 2003 Jeep Liberty. This would possibly indicate that the rear wiper was a proprietary Jeep technology/design and you may have to go to the dealer for the parts and possibly labor. Before doing this (because its usually a little more expensive going through the dealer), you may want to visit some internet forums and see if there's other ideas out there. Google "jeep liberty forums" then search "rear wiper 2003" once in the forums. I'm sure there's rapport on this topic. As far as front wiper blades, The 2003 Jeep Liberty takes 19" replacement windshield wiper blades on both sides front and aftermarket wipers are available. Note, when buying wipers be sure to always lookup your vehicle make, model and year in the application guide book at the store, or now-a-days you can Google 'lookup wiper size'.


How do you replace the rear windshield wiper on your 2002 Jeep Liberty?

The 2002 Jeep Liberty rear wiper blade is unique to Jeep. You'll probably have to get the part at the dealer and may be able to ask for the install procedure.


What size wiper blades on a 2003 Jeep Liberty?

The 2003 Jeep Liberty wiper blade sizes are 19" wiper blades on both sides front. See sources and related links below for more information. Since there are over 22 different wiper arm attachments, do not buy wipers just by length only - be sure to lookup exact wiper blade part numbers by vehicle make, model and year for the brand wiper you decide to purchase. This ensures correct length AND correct attachment.


What size are wiper blades on a 2003 jeep liberty?

The 2003 Jeep Liberty takes 19" wiper blades on both sides front. See sources and related links below for more information. Since there are over 22 different wiper arm attachments, do not buy wipers just by length only - be sure to lookup exact wiper blade part numbers by vehicle make, model and year for the brand wiper you decide to purchase. This ensures correct length AND correct attachment.


Why is a 2003 Jeep Liberty rear wiper not working?

Check the fuse. If the rear wiper fuse is good then it could be a wiring problem. Check the wires to the rear hatch, then check the motor itself.