In a Pontiac Sunbird, the temperature sensor, often referred to as the coolant temperature sensor, is typically located on or near the engine block, usually near the thermostat housing. This sensor monitors the temperature of the coolant and sends data to the engine control unit (ECU) for managing engine performance and cooling system operation. If you're troubleshooting, it may also be beneficial to check the owner's manual for the exact location, as it can vary slightly by model year.
In a 1993 Pontiac Sunbird, the temperature sensor, also known as the coolant temperature sensor, is typically located near the engine's thermostat housing or in the cylinder head. It is positioned to monitor the temperature of the engine coolant. Accessing it may require some disassembly, depending on the specific engine configuration. Always refer to a service manual for precise location and replacement instructions.
Crank sensors are always located on the camshafts. The 1989 Pontiac Sunbird crank sensor is located on the head of the engine towards to end of the camshaft.
Should be located at the rear of the radiator approx. 1/3 from the top unscrew to replace
on the right side of the block just above the trany The sensor is located just above the manfol.
one of the map sensor or vacuum switch.
right above the oil filter
on the side of the engine block on the driver side. screws in. has 3 wires coming out of the connector running to the fan.
Pontiac Sunbird was created in 1975.
beside coil pack behind firewall
There is no cam sensor on this particular engine. Only a crank sensor mounted behind the harmonic balancer.
the fan relay sensor is out of it.
on the right hand side of the block