answersLogoWhite

0

On my 1994 Mazda Navajo, which should be the same as an Explorer, their is a black plastic cover with 3 bolts on top of the engine. When you remove the cover the throttle and cruise control cables attach to the throttle lever there. My throttle is sticking but the problem seems to be where the cable attaches to the pedal.

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

Why is the transmission shifting late?

The transmission shifting is late because the kick-down cable needs to be adjusted. The kick-down cable is usually found on the throttle lever with the throttle cable.


How do you lubricate the throttle or TV lever ball studs on a 1998 ford explorer?

How do you lubricate the throttle kickdown or TV lever ball studs?


How do you change a throttle cable on a john deere 777?

To change the throttle cable on a John Deere 777, first, ensure the engine is off and cool. Remove the cover that protects the throttle assembly, then disconnect the old throttle cable from the throttle lever and the governor. Install the new cable by connecting it to the throttle lever and governor in the same manner as the old one, ensuring proper tension. Finally, replace the cover and test the throttle operation to ensure everything is functioning correctly.


Where is carburetor on push lawn mower?

Move your throttle lever back and forth and be looking at your engine. The other end of that cable (which will be moving as you move the throttle lever) is your carburator


How do put back throttle cable on a 94 Oldsmobile?

To put back the throttle cable on a 1994 Oldsmobile, first, locate the throttle body and identify the cable attachment point. Release any tension on the cable by pressing the accelerator pedal fully. Slide the cable end into the throttle lever, ensuring it clicks into place, then adjust the cable's tension if necessary. Finally, secure any clips or brackets that hold the cable in place and test the throttle operation.


How do you change throttle cable on a white LT 185 lawn tractor?

To change the throttle cable on a White LT 185 lawn tractor, first, ensure the engine is off and disconnect the battery for safety. Remove the old throttle cable by detaching it from the throttle control lever and the engine's throttle linkage. Install the new throttle cable by threading it through the appropriate guides and securing it to both the throttle control and the engine linkage. Finally, adjust the cable tension as needed and reconnect the battery before testing the throttle's functionality.


How do you install a throttle cable to the throttle body on a 1994 Oldsmobile cutlas siera?

To install the throttle cable on a 1994 Oldsmobile Cutlass Sierra, first, ensure the engine is off and the ignition key is removed for safety. Locate the throttle body and detach the old cable if necessary, then thread the new throttle cable through the firewall and into the throttle body assembly. Connect the cable to the throttle lever, ensuring it is properly seated, and adjust the cable tension as needed. Finally, secure any clamps or brackets and test the throttle operation before starting the engine.


How do you replace throttle cable on 1992dodge caravan 3.3?

To replace the throttle cable on a 1992 Dodge Caravan with a 3.3L engine, start by disconnecting the negative battery cable for safety. Next, remove the throttle cable from the throttle body by detaching it from the throttle lever and any clips or retainers holding it in place. Then, route the new cable through the same path as the old one, ensuring it is properly seated in the brackets. Finally, connect the new cable to the throttle body and check its operation before reconnecting the battery.


Where is the TPS on an 88 Chevy Celebrity?

It is attached to the throttle body exactly opposite the cam/lever with the cable(s) on it.


How do you change throttle cable on 99 Ford Escort?

To change the throttle cable on a 1999 Ford Escort, first, disconnect the negative battery terminal for safety. Remove the air intake duct to access the throttle body, then unclip the old throttle cable from the throttle lever and the pedal assembly in the cabin. Install the new throttle cable by reversing the removal process, ensuring it is properly seated and adjusted for smooth operation. Finally, reconnect the battery and test the throttle for proper function.


Where can you find the throttle position sensor in a 1993 Oldsmobile cierra cutlass?

The Throttle Position Sensor (TPS Sensor) is located underneath the air intake< right below the Idle Control Valve. If your new, Find where your throttle cable hooks up & its right there. Its on the throttle body. When you follow the throttle cable, you will see it go to a lever that turns a shaft. The TPS is on the opposite end of the shaft.


How do you hook up your gas pedal to your racing lawn mower?

To hook up your gas pedal to your racing lawn mower, first ensure that the mower's throttle cable is properly connected to the engine's throttle lever. Then, attach the gas pedal to a pivot point or lever system that will pull the throttle cable when pressed. Adjust the cable tension to ensure smooth operation and responsiveness. Finally, test the pedal to confirm it correctly controls the engine's speed before securing all components.