Its located on the throttle body weather is a spfi or a mpfi. Its held on by T15 torques head screws and has 3 wires on it. The aicm controls your idle and sets right next to it and has 4 wire running to it
Yes, should be on side of intake.
from the engine computer, which gets its rpm info from the crank position sensor
Code 24 means throttle position sensor input above the maximum acceptable voltage Code 55 means Completion of fault codes
On a 1993 Dodge Shadow with a 3.0L V6 engine, the camshaft position sensor is typically located near the front of the engine, mounted on the timing cover. It is positioned near the camshaft sprocket, which allows it to detect the position of the camshaft. To access it, you may need to remove other components, such as the air intake or electrical connectors, depending on the specific layout of your engine bay. Always consult a service manual for detailed instructions and diagrams.
my guess would be a vacuum leak or a bad throttle position sensor. The best thing to do is get in your car, start with the key in the off position...turn it on off on off and back to on. On being the position right before start. The check engine light will come on and then soon after will start flashing coded....check this out it is a life-saver... http://www.allpar.com/fix/80s-codes.html
Its located on the firewall... it is just sticking out, it has a 3 wire connection to it as well as a vaccum line coming from it.
There are actually many different vacuum hoses for the 1991 Dodge Shadow, and they are all in different places. Most vacuum hoses originate on the intake manifold, next to the throttle body, which sits underneath the air cleaner.
The length and position of a shadow depend on the angle of the light source, the distance between the object and the surface the shadow falls on, and the height of the object casting the shadow.
Only the Turbo II, III and IV engines had the intake air temp sensor and possibly the 3.0L V6 but I'm not sure on that one. The N/A 2.2L and 2.5L and the Turbo I do not have this sensor. On the engines that do have it, it is located in the intake manifold between the runners for the number 2 and 3 cylinders.
The position of Shadow Prime Minister does not exist.
To remove the throttle cable on a 2004 Honda Shadow Aero, first, ensure the motorcycle is off and cool. Locate the throttle grip assembly and remove any necessary covers or screws to access the throttle cable. Disconnect the cable from the throttle grip by loosening the retaining screw, then trace the cable down to the carburetor or fuel injection unit, where you will need to disconnect it from there as well. Once both ends are detached, you can fully remove the throttle cable from the motorcycle.
Yes.Yes.