Red is positive. If they are both black then the cable that is connected to ground is negative and the other cable is positive.
If it's a heavy gauge (around 8 AWG IIRC), that's the charge wire to the alternator BATT post. The larger cable (about 4 AWG) goes to the starter.
how to get a 2001 isuzu trooper hood open if release cable is broken
On a 2001 Isuzu Trooper, the starter is located on the passenger side of the engine, near the transmission. To replace it, first disconnect the negative battery cable, then remove the wiring harness and bolts securing the starter. After taking out the old starter, position the new one in place and secure it with the bolts, reconnect the wiring, and finally reconnect the battery cable.
To install a starter on a 2001 Isuzu Trooper, first disconnect the negative battery cable to ensure safety. Remove the starter by unscrewing the mounting bolts and disconnecting the electrical connections. Position the new starter in place, reconnect the electrical connections, and secure it with the mounting bolts. Finally, reconnect the negative battery cable and test the starter to ensure proper function.
Yes
accelerator cable
the red cable if there is no red cable usuallly the thicker cable is positive if that does not work look under your vehicle for the starter and fallow the thick wire back to your battery and that is you positive cable.
Is the positive battery cable for a 1989 cheyenne a fused cable? Can I buy this cable at a Auto Parts Store?
Connect the Positive + battery cable to the positive + battery post first. Then connect the Negative - cable to the negative - battery post.
spray it from the inside with wd40 see if that helps...
Red cable to positive, black cable to negative.
1. Remove negative battery cable 2. remove positive battery cable 3. remove battery 4. install new battery 5.attach positive cable 6.attach negative cable