Either the solenoid or starter has gone bad.
You connect it to itunes and go to the contacts bar and sync outlook contacts
expansion slots
You connect the positive terminal first.
remove the seat, place the battery into the holder, connect the drip tube, connect the battery connectors
Remove - battery cable Remove + battery cable from battery and starter solenoid Route new cable following original routing Connect to starter solenoid Connect to + battery terminal Connect - battery cable
Connect the Positive + battery cable to the positive + battery post first. Then connect the Negative - cable to the negative - battery post.
There are two SMALL wires on the starter. They are connected wrong.
Use the symbols for a battery, switch and bell and connect them together with a line starting at one side of the battery. From the battery series connect the switch and bell and then a line back to the battery.
Just connect the battery to the motorcycle battery cables with jumper cables and then start it.
The man said it Always connect the positive + cable first to the battery. Then connect the negative- cable to the engine somewhere. Never connect the negative cable to the battery itself. Batteries vent hydrogen gas and which can ignite with the slightest spark. For this reason never, ever, connect the negative first and never connect the negative to the battery.
Connect the positive + red charger cable to the positive + red battery post. Then connect the negative - black charger cable to the engine somewhere. Most engines have something metal sticking up that you can connect to. Do not connect the negative charge cable to the negative battery post, always connect it to the engine.