It is reverse threaded. You go clockwise to loosen.
There is no air conditioning fan on a 1992 dakota.
If your pully is damaged. Take it off and find the part number. Call Cummins and order it. If you don't have a pully to go by. Call Dodge with your truck serial number or Cummins with your engine serial number and they can trace it.
36mm wrench and a holder for the pulley. The fan is reverse threaded on a diesel.
They could be, it depends on the vehicle. On a dodge truck with the Cummins diesel from 1989-2002 it is left-hand thread for example.They could be, it depends on the vehicle. On a dodge truck with the Cummins diesel from 1989-2002 it is left-hand thread for example.
You need a 36mm wrench and a spanner/holding devise. The fan clutch is right hand threaded. You turn counter clockwise to remove.
36 mm wrench and a spanner to hold the pulley. Turn counter clockwise to loosen.
The water pump is to the passenger side of the fan drive, and the thermostat is under the upper hose attachment.
Right front of engine block (next to the fan pully) It is the smooth round pulley that is about 3 inches across.
A very likely cause is a failed radiator fan.A very likely cause is a failed radiator fan.
With a 36mm wrench and a spanner to hold the water pump pulley.
It unscrews. There is a special wrench you can buy for this, or make your own.
Fan Club - 1992 was released on: USA: 1992