0
It is a safety issue. The reason is that when you are using a wrench to disconnect the battery cable you can easily touch a portion of the car that is grounded. If you were disconnecting the positive + cable first and you accidently touch a metal part the vehicle you will create a massive short circuit with the fireworks involved. The wrench in your hand will become an arc welder. By disconnecting the negative - cable first there is no danger of this happening as touching a metal part of the vehicle will do nothing as you are already working with the ground. Always disconnect the ground cable first and then you can move to the positive cable without worries.
What else can I help you with?
Should you disconnect the positive or negative battery terminal first - 45k?
Always the negative cable first.
How do you disconnect and reconnect your battery on your 98 Cadillac?
Disconnect the negative cable first and connect the same negative terminal last when installing the new battery.
Is it safe to disconnect car battery while raining?
Disconnecting Auto Battery Terminal ConnectorsYes, it is safe to disconnect a "car" battery while it's raining, IF you do it properly.When disconnecting a vehicle battery, raining or not, ALWAYS disconnect the NEGATIVE [--] terminal first, and when reconnecting, always connect the NEGATIVE terminal last.
When removing the battery leads from the terminals you do what first?
Disconnect the negative - terminal first, then the positive + terminal. Unfasten the battery hold down clamp. When reinstalling the terminal connections connect the positive terminal first.
When you charge a car battery what do you disconnect first?
When charging a car battery, you should always disconnect the negative terminal first. This helps prevent any short circuits or sparks that could occur if the positive terminal is disconnected first while the battery is still connected to the car's electrical system. After charging, reconnect the positive terminal first before reconnecting the negative terminal.
How do you disconnect the battery in a 2001 dodge stratus?
To disconnect the battery in a 2001 Dodge Stratus, first, ensure the vehicle is turned off and remove the key from the ignition. Use a wrench to loosen the nut on the negative battery terminal (usually marked with a minus sign) and carefully lift the cable off the terminal. If you need to disconnect the positive terminal (marked with a plus sign), repeat the process after the negative terminal has been removed. Always disconnect the negative terminal first to prevent any electrical shorts.
How do you remove the battery on a 1999 Ford Escort ZX2?
Disconnect the negative terminal first. Then disconnect the positive terminal. Pull the ends straight up. Unbolt the top of the battery frame and lift up the cover on the battery.
Which battery terminal do you hook up first?
Connect the positive + cable first and negative - last. When disconnecting them disconnect the negative - first and positive + last.
How do you change a battery on a smart car?
Battery is located under passenger floor board. Pull back carpet to locate. Disconnect the negative termainal first, then disconnet the postive terminal. remove old batter - install new battery. Connect Negative Terminal first - then connect the positive terminal.
How do you disconnect battery on dodge avenger?
To disconnect the battery on a Dodge Avenger, first ensure the vehicle is turned off and in park. Using a wrench, loosen the nut on the negative battery terminal (marked with a minus sign) and carefully remove the cable from the terminal. It's advisable to do the same for the positive terminal (marked with a plus sign) if needed, but always disconnect the negative first to avoid sparks. Once disconnected, make sure the cables are secured away from the battery terminals.
How do you disconnect and install new 12 volt battery to alarm system?
To disconnect and install a new 12-volt battery in an alarm system, first ensure the system is powered down by turning off the main power supply. Next, carefully disconnect the negative (-) terminal first, followed by the positive (+) terminal to avoid any short circuits. Install the new battery by connecting the positive (+) terminal first, then the negative (-) terminal. Finally, restore power to the system and test to ensure everything is functioning correctly.
How do you change the battery on a 2011 Yamaha RS Venture?
To change the battery on a 2011 Yamaha RS Venture, first, locate the battery compartment under the seat. Remove the seat by unfastening the screws or latches. Disconnect the negative (-) terminal first, followed by the positive (+) terminal, and then remove the old battery. Install the new battery by connecting the positive terminal first, then the negative, and finally reattach the seat securely.
