0
The "bus" is the communication system between computers on the vehicle. "No Bus" is an indicator for a failure in the system. You will need to take in for repair unless you have access to a scan tool, multimeter, and good wiring diagrams. The failure could be in any computer, wire, connector, etc.
The "bus" is the communication system between computers on the vehicle. "No Bus" is an indicator for a failure in the system. You will need to take in for repair unless you have access to a scan tool, multimeter, and good wiring diagrams. The failure could be in any computer, wire, connector, etc.
What else can I help you with?
Why is my odometer display not on after changing the battery?
Because your odometer, or something connecting the odometer to the battery, is broken. Most likely the odometer is the problem if the rest of your dashboard is working fine.
How do you get the odometer to display on a 2007 Ford Freestar?
To display the odometer on a 2007 Ford Freestar, turn the ignition key to the "On" position without starting the engine. Then, press the "Trip" button located on the instrument panel until the odometer reading appears. If the display cycles through trip and fuel economy information, continue pressing until the standard odometer reading is shown.
Why does my odometer not work but my speed odometer and tach does on a 1992 Honda accord lx?
It depends on whether or not the car has a digital readout. If it has a digital display, chances are it would be a wiring problem, somewhere right behind the odometer. If it has an analog display, since the spedometer still works, chances are the odometer itself (the display) has gone bad--like a little gear in there or something. This is one of the simplest odometer problems to fix; just replace the display piece. If the spedometer wasn't working it would be a whole different story--probably a faulty cable.
How do you turn off the maintenance light on a 2006 Toyota Tundra?
Put the key into the ignition and press the odometer button. While holding down the odometer button, turn the key to the on position. You will see "-----"on the odometer display. It will count down "-----" "----" "---" "- -" "-". Then you will see zeros on the odometer display "000000". You can now release the odometer button. This will reset the maintenance light on your dash!!!!!!
What does no bus mean in the digital odometer on a jeep Cherokee?
The bus is the communication network between computers on the Jeep. No bus means the system has failed.
Why does your Dodge Ram odometer say done?
It says that when it is done displaying any trouble codes. To start that display you must have turned the key on, off, on,off,on.
What type of speed does an automoblie's odometer display?
The odo doesn't display speed at all, only distances covered.
How do you change odometer display to kilometer from miles on 2005 Nissan Titan?
To change the odometer display from miles to kilometers on a 2005 Nissan Titan, turn the ignition key to the "On" position without starting the engine. Press the trip reset button on the dashboard until the odometer display shows the desired unit of measurement. This should toggle between miles and kilometers. If the display does not change, consult the owner's manual for further instructions.
Saturn Vue has a blinking 'C' in the digital display to the right of the temperature display above the odometer - what does the 'C' mean?
Celsius
How do you change odometer display to kilometer from miles on jeep liberty?
By changing it to miles!
Where is the odometer located in 2006 Honda Accord?
Under the speedometer. Push the trip meter reset button and the display will change from outside temperature to the odometer.
How do you bring up engine codes dodge 2005 1500?
With a scan tool, or by turning the key on, off, on, off, on and watching the odometer display.With a scan tool, or by turning the key on, off, on, off, on and watching the odometer display.
