Why does the Fuel pump keeps running on your 92 explorer?

Answer 1

have you checked your computer? If your pump stays on when you first turn the ignition; without turning on the engine, the pump usually turns off after a few seconds. If your pump stays on then you can suspect the computer.

Remove the computer. Remove the two Torx screws and open up the box. Then look for three capacitors. Two will be 47 micro farad 16 volt and the other will be a 10 micro farad 63 volt. If they look bloated or like they are leaking some black stuff or if the leads are detached from the PC board; replace them. You can get the capacitors at the radio shack. The trick will be that you have to buy two 4.7 micro farad capacitors in the place of the 10 micro farad capacitor and wire them in a parallel configuration. The reason for this is that they do not sell a 10 micro farad with the VOLTAGE rating that is required (63 volts). This is the only capacitor that requires a 63 volt rating. MAKE SURE THAT YOU BUY "POLARIZED" CAPACITORS.

Hope this helps