0
What else can I help you with?
Why is the temperature gauge needle not moving on a Lincoln mkz?
why is the temperature gauge not moving on a 2007 Lincoln mkz
Why does the needle on your temp gauge flutter?
Defective temperature sensor or bad gauge
Why is the temperature gauge needle not moving on mercury tracer?
mostly likely something wrong with the sensor or gauge.
Is a 30 gauge needle smaller then a 31 gauge?
Yes, a 30 gauge needle is larger than a 31 gauge needle. In the gauge system, a higher number indicates a smaller diameter, so a 31 gauge needle is thinner than a 30 gauge needle. Therefore, the 31 gauge needle would be the smaller of the two.
Why doesnt your temperature gauge on your 1995 ford mustang work?
What are you talking about? My temperature gauge works fine. Though, if it wasn't I would check the temperature sending unit.
Why does the temperature gauge needle go all the way up when you turn the key on and stays up all the time?
A temperature gauge, that always read the maximum temperature, is usually not connected to the temperature sensor. The wire between the gauge and the sensor must be broken.
Is a 23 or 25 gauge needle smaller?
A 25-gauge needle is smaller in diameter than a 23-gauge needle. The larger the gauge number, the thinner the needle, so a 25-gauge needle has a smaller lumen compared to a 23-gauge needle. This means that for tasks requiring finer needles, such as pediatric or cosmetic procedures, a 25-gauge needle would be preferred.
Why temperature gauge needle doesn't go back to zero when turn off car?
If the temperature gauge needle doesn't go back to zero when the car is shut off, it is possible that the needle is sticking. A little WD-40 or electronic spray on the gauge might fix the problem. There could also be a problem with the MAP Sensor or a Radiator Pressure sensor in the engine.
What is the proper position for the temperature gauge needle on a 1996 Chrysler Sebring?
In the middle (about 195 degrees).
What is the normally position of arow in temperature gauge of elantra 1.6 2005?
the normally position of needle in temperature gage is a half of gage.
Why is a 21 gauge needle recommended for venipuncture?
The 21 gauge is a smaller needle.
Is a 22 gauge smaller than a 23 gauge needle?
Gauge is the term that indicates the diameter of the needle. Most commonly the needles that are used for medical purposed range from 7 Gauge to 33 Gauge, according to the Stubs scale. 7 Gauge needle will have the largest diameter while as the number increase, the diameter decreases. Therefore the 33 Gauge needle has the smallest diameter. So a 26 Gauge needle will have a smaller diameter than that of the 18 Gauge needle.
