The light probably burned out. Buy another one and replace it.
High beam light is out!
Check your head light bulb or check the fuse 10A under the hood and see if it's not blown.
Beam splitters work by using a partially reflective surface to divide a light beam into two or more separate beams. When light hits the surface, some of it is transmitted through and some is reflected. This allows the beam splitter to redirect the light in different directions.
Doesn't work, it'd be like trying to shine a beam of light onto a beam of light.
A beam splitter is a device that uses a partially reflective surface to divide a single light beam into two separate beams. When the light beam hits the surface of the beam splitter, some of the light is transmitted through and some is reflected. This creates two separate beams of light that travel in different directions.
there are two diff types of bulbs. High beam and low beam bulbs. If your low beam doesn't work then you need to replace those lights because they are probably blown.
I just fixed this problem , it was my daytime running light module
Exactly, and this is normal.Exactly, and this is normal.
change the light bulb that does not go on, on low beam, it possible that the wire inside the bulb for low beam is broken
Because there are two light bulbs and the low beam bulb is burned out
There is a light beam on one side of the track, and a reflector on the other side. When the light beam is broken, the timer goes off. I think.
The awnser is......