There is no fluid in the system or master cylinder/slave cylinder failure (hydraulic). Cable streched or broken (if not hydraulic).
Pump the pedal to the floor and then screw on the cylinder.
To adjust the clutch on a 2001 Honda Prelude, first, locate the clutch pedal adjustment nut under the dashboard. Turn the nut clockwise to raise the pedal height or counterclockwise to lower it, ensuring that there's a small amount of free play at the top of the pedal travel (about 1-2 inches). After adjusting, check the clutch engagement point by pressing the pedal; it should engage smoothly without excessive play or dragging. Finally, test drive the vehicle to ensure proper clutch operation.
hi, you may find that it dose not have a clutch cylinder, as this model usually has a cable. confirm this by following thru from top of clutch pedal. regards razzel
You can bleed it though if the pedal is just low. Check the master and slave cylinders for leaks too.
To adjust the clutch master cylinder on a Honda Prelude, first, locate the adjustment rod connected to the clutch pedal. You can typically turn the rod to either lengthen or shorten it, ensuring that there is a slight amount of free play (about 1-2 mm) at the top of the pedal's travel. After adjusting, check the clutch engagement point and ensure it operates smoothly without any binding. If necessary, repeat the adjustment until the desired engagement feel is achieved.
Well, we need lots more information here. Is the clutch pedal actually "stuck" to the floor? In other words, can you NOT lift the pedal up to the normal position? OR, has the clutch pedal "fallen" to the floor due to no resistance from the clutch?
any information on 87 Honda accord with the clutch/
It's called: Your clutch is working.
The clutch sticks to the floor sometimes if the pedal does not return to pressure plate, which has metal fingers arranged concentrically. YouÊneed to check the master clutch cylinder container to see if the fluid has all leaked out.
A 1995 Honda Accord clutch pedal switch is located directly under the clutch pedal. This switch stops the car from starting with depressing the clutch. This helps avoid accidents.
You have a broken clutch.
How do you install a cluch pedal spring on a 93 honda accord