answersLogoWhite

0

Excessive crank case blow by caused by worn piston rings

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

1986 ford f150 truck 6 backfiring through exhaust?

Intake manifold gasket may be leaking - check for loose bolts or replace fasket.


How hot does the flow tube on a EGR valve get?

as hot as the exhaust manifold there are exhaust gases passing through it


Where is the exhaust manifold and what does it do in the Ford Escape?

The exhaust manifold is the collection of pipes bolted directly to the engine head. It carries the burnt exhaust fume out of the engine to the catalytic converter and then through the muffler and out the tail pipe.


What is an exhaust gas recirculation valve?

The EGR valve takes unburnt gas vapors from the exhaust and sends it back through the intake manifold to be burnt. The EGR valve takes unburnt gas vapors from the exhaust and sends it back through the intake manifold to be burnt.


What is function of exhaust manifold?

the function of an exhaust manifold on a gasoline or diesel engine is to expel the burnt fuel from the combustion chamber of each piston out through the exhaust pipe after each combustion stroke of the piston has been completed.


What is exhaust gas recirculation?

The unburnt exhaust gases are recirculated back through the engine by way of the intake manifold. This helps reduce emissions.


What does the manifold assembly do?

The air/gas mixture from the carb is drawn into the cylinder through the Inlet manifold. The inlet manifold is designed so that there is sufficient volume of air/gas to meet the engine needs at all revs. Each branch is designed to create minimum air turbulence thus allowing the intake mixture to be sufficiently abundant at high revs to prevent power tail off. The exhaust gasses are forced through the Exhaust manifold to the exhaust pipe. The exhaust manifold and exhaust system are designed to over handle the volume of exhaust gasses so that there is not a loss of power at high revs. Exhaust manifolds, helped by the cylinder firing order, have even heat dissipation to prevent cracking.


Why is my 2004 silverado leaking antifreeze but i can't find the leak?

It's a possibility that coolant is leaking (slowly seeping) into one of the cylinders through a crack in the head gasket, thus creating a pathway for the coolant to travel. If this occurring you would see excessive you would see extra vapor from the exhaust pipe


How do you know when a manifold tuning valve is bad?

You can tell when a manifold tuning valve is bad when oil is leaking through it. You also can tell by inserting the dipstick into the valve and seeing if oil comes out through the dipstick.


Why does your car keep running out of water?

If a vehicle is loosing coolant then there is a leak. If no leak is visible then the coolant could be leaking into the oil, or leaking into a cylinder and being blown out through the exhaust.


How do you replace a 2002 Isuzu trooper starter?

To replace it remove the battery terminal so you will not have power. Loosen the bolts (use liquid wrench or wd40 for this will be rusty) exhaust pipe from the exhaust manifold (driver side) and then you need to loosen the exhaust pipe from the exhaust manifold to the part where it connect exhaust pipe from the other side of the exhaust manifold (passenger side) and then you need to loosen the electrical wire from the starter and then loosen the bolts that connect the starter now you can wiggle the starter to pull it out you need to try to figure out how to get it through the loosen exhaust pipe ( but it should come out)


How do you make a stock 1995 mustang gt exhaust louder?

cut the exhaust at the exhaust manifold and redirect the pipe through your airconditioning system all the way to the driverside airconditioning vent. It should work beautifully.