answersLogoWhite

0

Your clutch cable needs to be replaced, it is probably broken from it's shield at the firewall.

User Avatar

Wiki User

18y ago

What else can I help you with?

Related Questions

Where does the clutch fluid go in 95 suzuki sidekick?

Suzuki Sidekick has a cable for the clutch. No fluid required. If it hard to push or seems to 'stick' then replace the cable.


How do you adjust the clutch on a '97 Suzuki Sidekick?

I think it has a hydraulic clutch and no adjustment.


How do you Change clutch cable on 92 Suzuki Sidekick?

To change the clutch cable on a 1992 Suzuki Sidekick, first, ensure the vehicle is parked on a level surface and the engine is off. Begin by disconnecting the negative battery terminal for safety. Remove the old clutch cable by detaching it from the clutch pedal and the transmission, then install the new cable in reverse order, ensuring proper routing and adjustment. Finally, reconnect the battery and test the clutch operation before driving.


Where is the Clutch pedal switch on a 1997 Suzuki Sidekick JX?

many posts for this here. top of clutch pedal. at pivot.


Suzuki sidekick neutral safety switch location?

Neutral safety switch prevent a manual car from accidentally starting in gear. The safety switch on a Suzuki Sidekick can be found behind the clutch pedal.


How do you change the clutch cable on a 1995 suzuki sidekick?

To change the clutch cable on a 1995 Suzuki Sidekick, first, ensure the vehicle is in gear and the engine is off. Locate the clutch cable at the transmission and at the clutch pedal; detach it from both ends. Install the new cable by threading it through the appropriate guides and securing it to the transmission and clutch pedal. Finally, adjust the cable tension as needed and test the clutch operation.


Where is clutch reservoir for 1995 Suzuki sidekick?

its a cable. only 96-98 SPORTS 1.8 Liter have hydr. clutch. (of the early models you mention)


Is the 95 suzuki sidekick have a slave cylinder?

Yes, the 1995 Suzuki Sidekick does have a slave cylinder as part of its manual transmission system. The slave cylinder is responsible for engaging and disengaging the clutch. If you're experiencing issues with the clutch or shifting, it could be related to the slave cylinder or other hydraulic components in the system.


Where is the clutch safety switch on a 1994 suzuki sidekick?

The clutch safety switch on a 1994 Suzuki Sidekick is typically located on the clutch pedal assembly, mounted to the bracket that holds the pedal mechanism. It is designed to prevent the engine from starting unless the clutch pedal is fully depressed. You can access it from the driver's side under the dashboard. If you need to troubleshoot or replace it, make sure to disconnect the battery first for safety.


How do you install clutch cable on a 95 Suzuki sidekick jx 16 valve?

To install the clutch cable on a 1995 Suzuki Sidekick JX 16 valve, start by disconnecting the old cable from the clutch pedal and the transmission. Route the new cable through the firewall and secure it to the clutch pedal assembly. Next, attach the cable to the clutch release lever on the transmission, ensuring it is properly adjusted for tension. Finally, check the clutch operation to ensure it engages and disengages smoothly.


Does auto have to be in gear with clutch engaged to start manual transmission in 93 suzuki sidekick?

Yes, in a 1993 Suzuki Sidekick with a manual transmission, the vehicle must be in gear with the clutch engaged (depressed) to start. This is a safety feature designed to prevent the car from rolling or lurching forward if it were to start in gear. If the clutch is not engaged, the starter will not activate. Always ensure the vehicle is in neutral and the clutch is fully pressed before starting.


Where is clutch master cylinder on suzuki sidekick sport?

The clutch master cylinder on a Suzuki Sidekick Sport is typically located on the driver's side of the vehicle, mounted on the firewall. It is connected to the clutch pedal and has a reservoir for hydraulic fluid. To access it, you may need to remove some components in the engine bay for better visibility. Always refer to the vehicle's service manual for specific details and guidance.