0
If the high beams on your 2002 Freightliner are functioning but the low beams are not, the issue could be due to a blown fuse, a faulty headlight relay, or a problem with the low beam bulbs themselves. It's also possible that there is a wiring issue or a bad ground connection. Checking the fuses and relays related to the headlights is a good first step, followed by inspecting the bulbs and wiring for any damage. If these components are all in good condition, seeking professional help may be necessary.
What else can I help you with?
Why would the high beams work but the low beams don't on a 2002 Chrysler Sebring?
fuse, bulbs or switch
2002 vw jetta Low beams do not work high beams still work?
Bulbs are burnt. replace both. low and high are together in the same bulb.
Why does your low beams not work but your high beams do on a 2002 vw beetle?
Check bulbs Check hi-low switch
Why will my high beams work but my low beams do not on my 1994 Chevy half ton?
Your high beams work but your low beams do not because the switch is broken that switches between high and low beams. Electrical switches wear out.
What will cause a 2002 Monte Carlo to have high beams and no low beams?
Well, first i would replace the low beam bulbs, if that doesn't work, perhaps a fuse, and if not that, wiring problems.
Why do the low beams not work and the high beams work on a Mitsubishi Eclipse?
If low beams do not work and the high beams of a Mitsubishi Eclipse do, it is probably due to a corroded connector. Simply clean the connector and add some petroleum jelly to the terminals.
Why do turn signal only work when high beams are on?
Take your car in to have it checked. Turn signals should work without high beams.
Why wont high beams work high beams work?
First check the bulbs, if the bulbs are good I would suspect the high/low beam switch is bad.
2000 Chevy Cavalier low beams do not work but day running lights and high beams work what could be wrong?
As a guess both low beams are burnt out The daytime running and high beams are the same light filament. Or the fuse or the relay for the low beams.
Headlights of a 1994 Toyota Camry LE do not work but High beams work what is wrong?
check the bulb low bean burns out before high beams
When turning on head lights in my 1993 ford explorer they do not work when you hold the high beam switch then the head lights work?
your bulbs are burnt out. when you switch on the high beams its only the high beams. but when you flash your brights it lights up both high and low beams.
Fog light switch on the 2002 Ford Explorer XLT?
It's the same switch as is used to turn the headlights on, just pull it out. The driving lights will not work at the same time as the high beams so make sure the high beams are turned off.
